Radon Mitigation & Testing in Franklin, WI
New house, capped pipe in the basement marked “radon”? That pipe doesn’t lower radon on its own until it’s tested and, if needed, given a fan. Milwaukee Radon Mitigation handles radon mitigation in Franklin, WI for newer builds and older homes alike. Brian Thompson, our certified specialist, tests first and tells you exactly what your house needs.
Who Tests and Mitigates Radon in Franklin, WI?
Milwaukee Radon Mitigation tests and mitigates radon in Franklin, WI. Owner Brian Thompson, an NRPP-certified radon measurement and mitigation professional, runs tests of at least 48 hours with professional continuous monitors. In newer Franklin homes with passive radon piping, he can add a fan to make the system active. Older homes get a full sub-slab depressurization system. Based in West Allis, WI.
Why Franklin Homeowners Test for Radon
Franklin covers a big stretch of southwest Milwaukee County, with older farmhouses and mid-century homes alongside newer subdivisions. Every one of them sits on Wisconsin soil, and any of them can test high.
Wisconsin DHS estimates about 1 in 10 Wisconsin homes has high radon. EPA and the U.S. Surgeon General name radon as the second leading cause of lung cancer after smoking.
New construction isn’t automatically low. A passive vent pipe helps, but only a test shows whether it’s enough. Wisconsin DHS notes that in new buildings where piping is already installed, a contractor can add a fan to turn a passive system into an active one.
Radon Services in Franklin
- Radon Testing — The first step for every Franklin home, new or old: a digital test of at least 48 hours in the lowest living level.
- Radon Mitigation Systems — Full sub-slab depressurization for Franklin homes built without radon piping, sized after a pressure field test.
- Fan Replacement & Repair — For active systems that have stopped drawing. We replace the fan and confirm the manometer reading.
- System Inspection — Not sure if your builder’s pipe is passive or active? We’ll check, label it and explain your options.
- Radon Resistant New Construction — For Franklin builders: gravel, sealed vapor barrier and a vent stack installed before the slab is poured.
- Vapor Intrusion Mitigation — Sub-slab vapor systems for commercial and industrial properties in Franklin’s business parks, with vapor intrusion testing available first.
Radon Testing
We use calibrated digital continuous radon monitors for fast, precise testing in homes, businesses, and real estate. Certified professionals perform measurements following all protocols and local requirements to ensure accurate radon level assessment.
Radon Mitigation
Radon Resistant New Construction
Radon System Repair & Fan Replacement
Radon System Inspection
Vapor Intrusion
We use calibrated digital continuous radon monitors for fast, precise testing in homes, businesses, and real estate. Certified professionals perform measurements following all protocols and local requirements to ensure accurate radon level assessment.
Our custom radon mitigation systems are designed for your home’s unique foundation and airflow. We use proven techniques beyond sealing cracks, installing monitoring devices to ensure your system effectively reduces radon levels.
We collaborate with builders and homeowners to install passive and active radon systems in new homes, ensuring compliance with codes and providing long-term radon protection from the start.
We fix improperly installed radon systems, correct code violations, replace failing fans, and optimize system performance to maintain effective radon reduction in your home.
Our certified inspections identify installation issues and ensure your radon system meets best practices, especially important in areas with minimal radon enforcement like Wisconsin.
We design and install active soil depressurization systems to prevent volatile organic compounds (VOCs) from entering commercial and industrial buildings, enhancing indoor air safety.
Three Common Franklin Situations
What a Franklin job looks like depends on what’s already in the basement.
1. A newer home with a passive pipe. You’ll usually find a capped or open PVC pipe coming out of the slab and running up through the house. We test first. If the result is at or above 4.0 pCi/L, we add an inline fan in the attic or outside, add a pressure gauge (manometer) so you can see it running, check the slab seals, and retest. This is often the simplest upgrade there is. Pricing for a passive-to-active upgrade is quoted per job, so request a free quote.
2. A home with no radon piping. Older Franklin homes, and some newer ones, have nothing in place. Brian runs a pressure field test to pick the suction point, then installs a complete sub-slab depressurization system: suction pit, sealed pipe, fan outside the living space, exhaust above the roofline.
3. A home under construction. If you’re building, the cheapest time to plan for radon is before the slab goes in. We work with your builder on gravel, vapor barrier and pipe placement so adding a fan later is a small job instead of a full retrofit.
In all three cases, the result gets checked. The included follow-up test runs between 24 hours and 30 days after an install or upgrade, so you see the before and after numbers. EPA recommends retesting every 2 years after mitigation.
Homes, Builders and Businesses in Franklin
Franklin keeps growing, so we work with three groups here. Homeowners get testing and mitigation. Builders and general contractors get radon-resistant construction support during the build. Business owners and property managers in Franklin’s commercial and industrial areas get radon testing, mitigation and vapor intrusion systems. Larger buildings can ask about commercial radon mitigation. Brian works directly with builders on new construction.
Have a Passive Pipe? Find Out If It's Enough
A 48-hour digital test will tell you.
Certified Radon Professionals for Franklin
Turning a passive system active sounds simple, and often is, but fan size, seals and exhaust height still have to meet the standard. Brian Thompson is an NRPP-certified radon measurement and mitigation professional (109591-RMP and 109619-RMS) and follows recognized national guidance on retrofits and new construction.
You can verify his certification with the search tool at nrpp.info, or read more about Brian Thompson.
A Typical Franklin Job, Start to Finish
Franklin is about 20 minutes south of our West Allis base. Most Franklin jobs start the same way: a test placed within a few days of your call, at least 48 hours of readings, and results right after. If the number is high, your quote comes the same day or within 24 hours.
With no radon piping in place, a standard sub-slab system takes about 4 hours to install. The pipe is typically 3 to 4 inches, and the fan draws about 40 to 120 watts depending on the home and fan. Each fan carries a 5-year warranty, and the work is covered by a lifetime workmanship warranty. The follow-up test is included. In Brian’s experience, typical results come in below 2.0 pCi/L, with more than 90% of homes below 1.0 pCi/L.
Why Franklin Families Pick Us
We’ll tell you when a fan is all you need. Honest quotes, careful work and a 5.0 Google rating across 28+ reviews. Family-owned, BBB accredited, licensed and insured.
NRPP-certified radon professional
Licensed and insured in Wisconsin
Owner-led expertise from Brian Thompson
EPA-aligned methods and documentation
Clean installations and transparent pricing
Proven results across Milwaukee County
Months Later, Still Working
Melissa O. described Brian as prompt and knowledgeable, and said her system was still working perfectly two months after the install. (Summary of her Google review.)
Covering All of Franklin
We serve homes and businesses across Franklin, from neighborhoods near Whitnall Park and the Root River Parkway to the Ballpark Commons area, Rawson Avenue, Highway 100 and the I-94 side of the city. Franklin is about 20 minutes from our West Allis base.
Franklin Radon FAQs
Have a passive pipe? A 48-hour digital test will tell you if it’s enough.
Is radon a problem in Franklin, WI?
Yes, it can be. Radon shows up in Franklin homes of every age, including newer homes with passive radon pipes. Wisconsin DHS estimates about 1 in 10 Wisconsin homes has high radon, and the only way to know about yours is a test. Results under 4.0 pCi/L mean no system is needed now.
How quickly can you test or install a radon system in Franklin?
A Franklin test is usually placed within a few days of your call. It runs at least 48 hours, and you get results right after. Quotes come the same day or within 24 hours, and a full new system takes about 4 hours to install. Franklin is about 20 minutes from West Allis.
Have you installed radon systems in Franklin homes?
Yes. Brian works in Franklin regularly, about 20 minutes from our West Allis base. He handles new sub-slab systems in older homes, fan upgrades on passive pipes in newer ones, and radon-resistant work with builders. He does every test and install himself.
Radon won't wait, why should you?
Contact Milwaukee Radon Mitigation today for expert radon testing, mitigation, and system installation services in Milwaukee, WI. Ensure a healthy indoor environment for your family by reaching out to our certified professionals for reliable and efficient radon solutions.
6301 West National Avenue West Allis, WI 53214